T401 - Caps and Stoppers
Made of polyethylene
Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological procedures; and the fully sealed position where the cap is pushed tight to seal the tube for anaerobic use or for storage, transfer and centrifuge applications.
For more info, click here
Download high resolution image
Any questions? Do not hesitate to contact us.
| Cat. # |
For tubes |
Cat. # |
For tubes |
Color |
Qty/Bag |
Qty/Cs |
| T401-3N |
12 mm |
T401-10N |
17 mm |
Natural |
1000 |
4000 |
| T401-3B |
12 mm |
T401-10B |
17 mm |
Blue |
1000 |
4000 |
| T401-3G |
12 mm |
T401-10G |
17 mm |
Green |
1000 |
4000 |
| T401-3R |
12 mm |
T401-10R |
17 mm |
Red |
1000 |
4000 |
| T401-3W |
12 mm |
T401-10W |
17 mm |
White |
1000 |
4000 |
| T401-3Y |
12 mm |
T401-10Y |
17 mm |
Yellow |
1000 |
4000 |
For more info, click here
Download high resolution image
Any questions? Do not hesitate to contact us.
| Cat. # |
For tubes made of |
For tubes |
Color |
Qty/Bag |
| T401-3DSPE |
Polystyrene |
12 mm |
Natural |
1000 |
| T401-3DSPP |
Polypropylene |
12 mm |
Natural |
1000 |
| T401-10DSPE |
Polystyrene |
17 mm |
Natural |
1000 |
| T401-10DSPP |
Polypropylene |
17 mm |
Natural |
1000 |