(450) 464-1723

Viewed products

T330-75 - 5.0 ml ClikLok™ Tubes

  • Made of polypropylene
  • RNase, DNase, Pyrogen and DNA free
  • No slip agents, plasticizers, mold release agents and biocide substances used in the manufacturing
  • Graduated
  • Autoclavable

More details

  • Flat top
  • Flat top with cavity for CapInsert™

Designed for the simple and safe processing of medium-sized sample volumes. Up until now, for samples larger than 2.0 ml, the only choice was to use large conical screw-cap tubes (15 ml for example) which were both impractical and prone to contamination.

The potential pipettor shaft contamination is greatly reduced since the 59 mm total tube length (vs. 120 mm for 15 ml tubes) is short enough for standard 1 ml or 5 ml tips to reach the tubes's conical bottom.

The 16 mm tube diameter is identical to the diameter of standard 15 ml tubes, ensuring further compatibility with centrifuge rotors, etc.

Center of cap designed for easy puncture and access with a syringe/needle.

Precise lid sealing for minimal evaporation rate during long-term storage. Cap lock prevents unintentional lid opening during incubation, storage and transportation.

Center of cap designed for easy puncture and access with a syringe/needle. 

Withstands temperatures from -196°C to +121°C. In applications over 80 °C, we recommend the Simport CapLock™ clips.

Use CapInsert™ for sample identification. Writing surface on flat cap and side wall.

Non-sterile tubes

Available in 6 colors

Flat top or flat top with cavity for CapInsert™.

100/Pk; 200/Cs.

Sterile tubes

Only available in Natural or Amber colors

Flat top or flat top with cavity for CapInsert™. 

20/Pk; 200/Cs.


Material Polypropylene (PP)
Bottom (Tube) Conical Bottom
Height (mm) 60.2 mm
Volume 5 ml
Graduations 0.5 ml increments etched on tube
Temperature range -196°C to +121°C
Certified RNAse, DNAse, DNA and Pyrogen free