(450) 464-1723

Viewed products

T365 - 5.0 ml MacrewTubes™

  • Made of polypropylene
  • RNase, DNase, Pyrogen and DNA free
  • No slip agents, plasticizers, mold release agents and biocide substances
  • Graduated
  • Autoclavable

More details

  • Tubes only
  • Tubes only with attached caps, sterile

Designed for the simple and safe processing of medium-sized sample volumes. Up until now, for samples larger than 2.0 ml, the  only choice was to use large conical screw-cap tubes (15 ml for example) which were both impractical and prone to contamination.

The potential pipettor shaft contamination is greatly reduced since the 62 mm total tube length (vs. 120 mm for 15 ml tubes) is short enough for standard 1 ml or 5 ml tips to reach the tubes's conical bottom

The 16 mm tube diameter is identical to the diameter of standard 15 ml tubes, ensuring further compatibility with centrifuge rotors, etc.

Smooth bottom has no sharp points hurting your fingers. Ultra clear resin gives you a better view. Slim design fits high capacity rotors.

3/4 turn lesk proof Lip seal caps

Precise lid sealing for minimal evaporation rate during long-term storage. 

Withstands temperatures from -196°C to +121°C (not to be immersed in LN2 liquid phase).

Use CapInsert™ for sample identification. Writing surface on flat cap and side wall.

3/4 turn leak proof lip seal cap available either pre-attached or separately.

Caps Sold Seperately

Screw cap for 5.0 ml tubes with lip seal. Available with or without tethered closure. (See T366)

Center of cap with "membrane" area designed for easy puncture and access with a syringe/needle. Once punctured, the opening can be useful for venting the internal pressure during heating. Precise lid sealing for minimal evaporation rate during long-term storage.

Designed to receive either a Color CapInsert (M957 Series) or 2D Insert (M957BK-2D).

Ordering information

Tubes only available in pack of 100; case of 200.

Sterile tubes with attached caps available in pack of 20; case of 200.

Screw Caps (See T366) are sold separately and are available with or without tethered closure. Sold in packs of 100; case of 200.


Container material Polypropylene
Cap material High density polyethylene
Bottom (Tube) Conical Bottom
Height (mm) 62.5 mm
Graduations Yes
Cap / Cover Type Pierceable
Autoclavable Yes